Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Slot Car Corner Canada

Categories

Categories

SCC Tuning Parts

Always looking for that little something that will make your car go faster than your opponent's? Or better yet, looking for the trick or the part that will give more pleasure just driving your car around the track? You're not alone in this quest and the racing performance parts from Slot Car Corner were designed to do just that. They were all tested in true racing conditions (with success!), by the best drivers and the best car builders out there.

Vous êtes toujours à l'affût de la plus grande performance possible pour vos voitures, mais surtout à la recherche d'un plaisir de pilotage inégalé? Vous n'êtes pas seuls dans cette quête et les produits d'ajustement et de performance Slot Car Corner sont tous conçus avec ces deux objectifs en tête. Ils ont tous été testés en situation de course (avec succès!), par les meilleurs pilotes et les meilleurs préparateurs de voitures du continent.

 

  • 4-40 Set Screws

    4-40 Set Screws $4.34 $4.00

    These are high-quality 4-40 set screws. Requires a 0.050" hex driver (available for purchase separately). Common 1/32 applications include NSR and BWA wheels. Available in packages of 10. Les vis de...

  • 4-40 Set Screws - Oval Point

    4-40 Set Screws - Oval Point $5.20 $5.00

    These are high-quality 4-40 set screws. Requires a 0.050" hex driver (available for purchase separately). Common 1/32 applications include NSR and BWA wheels. Used to reduce friction with the front axle when...

  • Adjustable Front Axle Mounts

    Adjustable Front Axle Mounts $10.14 $8.00

    For those of you who like to tune your chassis by setting the height of the front axle/wheel, these adjustable front axle mounts provide an easy, precise way to do so. Two set screws, one directly above and...

  • Axle Spacers

    Axle Spacers $2.45 $2.00

    Axles spacers are essential when setting the front and rear tire track width. Our thinner spacers are made of stainless steel and are 0.005" or 0.010" thick. Our other thin spacers are made of low-friction...

  • Axle Stops (pair)

    Axle Stops (pair) $5.50 $5.00

    If you race cars with an anglewinder motor/gear configuration, proper gear mesh is obtained using an axle stop. The SCC axle stop uses a straightforward design which is CNC machined from lightweight aluminum and...

  • Body Post Repair Kit

    Body Post Repair Kit $4.34 $4.00

    How many of your slot car bodies see limited use (or can no longer be used at all) because of broken/damaged body posts like the one in the accompanying picture? You don't have to race 1/32 slot cars very long to...

  • Bushing Alignment Kits and Parts

    Bushing Alignment Kits and Parts $20.29 $16.00

    Proper bushing alignment is an example of a "little thing" which when combined with other "little things" can make a big difference in how well your car performs. There is exactly one way bushings are properly...

  • Eyelets for Motor Wire

    Eyelets for Motor Wire $4.34 $4.00

    Pack of 10. Those eyelets are made in brass and are always a must-have in a slot box. Race-proven and high-quality, they will fit most popular guide flags...

  • Guide Spacers

    Guide Spacers $4.34 $3.50

    Guide spacers are one of those "little things" that are often overlooked but can make a big difference in the performance of your car. Guide spacers are useful when trying to set the height of the guide and/or to...

  • Hi-Flexibility Motor Lead Wire

    Hi-Flexibility Motor Lead Wire $4.34 $4.00

      If you're planning to replace your car's guide, don't overlook the motor lead wires! This wire is ideally suited for scratch builders or to replace the cheap, stiff wire which comes with many 1/32 RTR cars...

  • M2 Set Screws

    M2 Set Screws $4.34 $4.00

    These are high-quality 2mm (M2) set screws in a variety of popular lengths. Sold at very reasonable prices. Requires a 0.035" hex driver. Common applications for each length include: 5, 6 and 8mm (Oval...

  • M2 Set Screws - Oval Point

    M2 Set Screws - Oval Point $7.24 $6.00

    These are high-quality 2mm (M2) set screws in a variety of popular lengths. Sold at very reasonable prices. Requires a 0.035" hex driver. Common applications for each length include: 5, 6 and 8mm (Oval...

  • Motor Retaining Screws (10)

    Motor Retaining Screws (10) $4.34 $4.00

    Motor retaining screws help you securely fasten the motor to the chassis. This prevents the motor's torque from twisting the motor which can adversely affect the gear mesh and/or twist the chassis which affects...

  • Racing Bronze Bushings

    Racing Bronze Bushings $5.79 $5.00

    Our Racing Bronze Bushings take our stock high-quality bronze bushings described above one step further - the bushings are counter-bored from one side for a portion of the inner bearing "race"...

  • SCC Bronze Bushings

    SCC Bronze Bushings $4.05 $4.00

    A pair of bronze bushings for 3/32" axles, precisely machined to be snug around the axle.

  • SCC Copper Braid

    SCC Copper Braid $6.51 $6.00

    Designed and manufactured to our specifications, this is a three (3) foot length of high-quality copper braid at a great price. A bit stiffer than some "competition" braids, our braid is designed to hold its shape/profile...

  • SCC Lighting Kit

    SCC Lighting Kit $33.34 $32.00

    Note:  This is an advanced kit requiring fabrication and soldering skills involving delicate electronic components.  This kit is NOT intended for beginners!   *** New/Improved ***  Features...

  • SCCrews

    SCCrews $4.34 $4.00

    Experienced 1/32 slot car builders and racers know the importance of loosening body screws to let the body "float". The same holds true for motor pods - in general a pod that "floats" will result in a better performing car...

  • Screws and Locknuts for Motor Pod

    Screws and Locknuts for Motor Pod $4.05 $4.00

    Miniature machine screws and nylon lock nuts which are perfect for motor pods - no more screws loosening up (or coming out...) when you least expect it. The miniature nylon lock nuts eliminate the need to...

  • Self-Adhesive Lead Sheets

    Self-Adhesive Lead Sheets $5.79 $5.50

    Lead sheets. 2 sheets per pack. Thickness: 0.032" or 0.063". Self-adhesive on the back. Easy to cut. 0.032" thick: 1.5" x 2.0" per sheet (2 sheets per pack) 0.063" thick: 1.0" x 2.0" per sheet (2 sheets per...

  • Slot Car Corner Canada Decals

    Slot Car Corner Canada Decals $7.00 $4.00

    Quality waterslide decals to show your Canadian roots. Decals for Slot Car Corner Canada, CB Design wheels, Piranha motors, Quick Slicks tires, Canada and Québec symbols, etc. Very low price, show your Canadian...

  • For 1/32 cars

    Slot Car Corner Setup Block $24.64 $19.00

      Setup blocks are one of those indispensible items used by slot car racers everywhere yet seldom get much attention. While most racers, particularly the more experienced racers, would readily acknowledge the...

  • Slot Classic Extensible Chassis

    Slot Classic Extensible Chassis $15.00

    This is a new product from SlotClassic: an extending chassis kit made in inflamed plastic of high quality, very adequate to motorize easily all kinds of coachworks at a 1:32 scale. It is formed by a principal rear piece (A)...

  • Tire Gluing Tool

    Tire Gluing Tool $22.00

    (Description en français plus bas) Let’s face it – gluing slot car tires is a tedious and often messy task. Depending on the method you use, it’s difficult to ensure the adhesive is spread uniformly...

  • Tire Glue Sticks

    Tire Glue Sticks $2.25

    SCCC Tire Glue Sticks are used by many top 1/32 racers when gluing tires to wheels. The angled tip makes it easier to apply and spread glue uniformly between the tire and wheel. Reusable - simply wipe away excess glue after...

  • Motor Shaft 2" Sleeve - 1.5mm to 2.0mm

    Motor Shaft 2" Sleeve - 1.5mm to 2.0mm $3.50

    (1 tube per pack) Stainless steel tubing - 2 inches long Press fit, but Loctite is advised on the motor shaft end. 1.5mm inside diameter x 2mm outside diameter Great for making drive shafts for those slim can motors...