14mm Wheel Inserts - ATS
CG SlotCars offers the widest range of high-quality 3D printed wheel inserts on the market today with more inserts planned for the future. Designed for 14mm insert wheels from CB Design, Slot.it, etc., CG SlotCars wheel...
14mm Wheel Inserts - BBS
14mm Wheel Inserts - Campagnolo
14mm Wheel Inserts - Minilite
14mm Wheel Inserts - Revolution
14mm Wheel Inserts - Steel 4-Bolt
14mm Wheel Inserts - Wire 60-Spoke
15mm Wheel Inserts - 5-Spoke RSR
CG SlotCars offers the widest range of high-quality 3D printed wheel inserts on the market today with more inserts planned for the future. Designed for 15mm insert wheels from CB.Design, Slot.it, etc., CG SlotCars wheel...
15mm Wheel Inserts - Fuchs
15mm Wheel Inserts - Minilite
15mm Wheel Inserts - OZ Rally
15mm Wheel Inserts - Roadster
15mm Wheel Inserts - T70 Spyder
15mm Wheel Inserts - Torque Thrust
15mm Wheel Inserts - Wide-5 - 4-Bolt
15mm Wheel Inserts - Wide-5 - 5-Bolt
15mm Wheel Inserts - Wire 72-Spoke
4WD - Cogged Transmission Belt
Transmission belt for 4WD System.
4WD - Pulley
CB Design 1/24 Classic Steel Wheels
Based on our popular 1:32 Classic Steel Wheels, the 1:24 Classic Steel Wheels are intended primarily for scratch builders. There are two (2) variations of this wheel - one variation is designed for use with 3/32"...
Group 5 - Mustang Turbo - #6 - Mid-Ohio 1981
(With new motor mount)
Racer cars are high-performance 1/32 slot cars in a variety of eye-catching liveries. Featuring a very detailed Racer body and a chassis with high-quality Slot.It parts throughout, Racer cars are...
Group 5 - Porsche Kremer 935 K2 - Le Mans 1978
Guide Adapters - Carrera - Large
CG SlotCars offers guide adapters that fit most 1:32 Carrera cars. These adapters allow you to install a more competitive guide flag (e.g. Slot.it, Scaleauto, Sloting Plus). The guide adapters are 3D printed using a new...
Guide Adapters - Carrera - Standard
HRS2 RTR Chassis
Complete ready-to-run car less body.
MicroCarbon Chassis - NSR Mosler
CG Slotcars introduces a competition 3D printer MicroCarbon chassis designed as a replacement for the NSR Mosler Chassis. MicroCarbon is the most advanced 3D material available in slot car racing consisting of...
MicroCarbon Chassis - Slot.it Porsche GT1
CG Slotcars introduces a competition 3D printer MicroCarbon chassis designed as a replacement for the Slot.it Porsche GT1 Chassis. MicroCarbon is the most advanced 3D material available in slot car racing...
Motor Mount - Inline - Boxer/Flat6 - Offset 0.5mm - Hard
Peugeot 207 S2000 IRC - #3
Avant Slot Peugeot 207 S2000 IRC #3. Driven by Brian Bouffier in the Rally Acores 2012. 4-wheel drive system for realistic rally track action.
Screws - 2.2x5.3mm - Brass Sink Small Head
Pack of 10
Wheel Knock-Off - 2-Ear
Will nicely complement some of the wheel inserts offered by CG SlotCars: Wire Spoke (14 and 15mm), T70 Spyder (15mm) and Watson Roadster (15mm).
All CG SlotCars parts are black unless noted. Set of 4...
Wheel Knock-Off - 3-Ear
Porsche 962C LH - #9 - Le Mans 1990
Porsche 962 is a sport-prototype racing car created to replace the already successful Porsche 956, in order to allow its presence in the Americans IMSA and WSC Group C competitions.
It was one of the most successful racing...
Wera - Torx T6 Screwdriver
Perfect for the ThunderSlot cars and some other brands that use Torx screws.
Motor V12/3 21.5k - Sidewinder Endbell Drive
Endbell Drive, Sidewinder 11T Pinion.
Motor V12/3 29k - Sidewinder Endbell Drive
All prices are in CAD. © 2017 Slot Car Corner Canada | Sitemap
Powered by BigCommerce